Our dear hands (a) co Mattia D. had one of his ideas: an evening rally / drift in the ice rink in Cervia (RA).
We are trying to negotiate with the operator of the track to be able to turn at least a couple of hours one of the next Friday night. Get ready!
Here are tips nitronny attending RCRally.it and Scalers & Crawlers.it :
... having the season I thought it would be useful to open a topic about how I made my studded tires obviously starting from Tamiya block tires;
need:
- A 1.5mm drill bit
- 500 Parker screws (round head) 3X12 or 3x16 size depending on the height
half - a little bottle of
attack - a lot 'of snots pattafix
- lots of patience!
we start with the boring rubber corrrispondenza of each piece where we find the pre-hole already 'original
once pricked all begin to put the screws to a hole so that the flat part of the screw (the part below the head) is at support, as' doing the same extent as we have for all;
when we finished I tighten the screws I put a bit of attack at all, you never know .....pattafix and then I started to fill with the remaining rubber to the edge then be bonded;
remains only 'to put everything in the circle and glue!
NOTE:
of course the tires will remain as if they were so solid tires with more weight and less cushioning and VERY dangerous especially for hands and jackets (I have already 'ripped views) but the result is' very effective! !
0 comments:
Post a Comment